Tank Access Plates - Inspection ports

Call us today for a chat about your fuel problem: 02 9972 9938

Clean Diesel Australia offers a wide range of tank access plates (inspection ports) fabricated from 316 stainless steel (can be used on water tanks) in accordance to ISO standard 21487:2012.

All products are designed in house and fabricated in Australia at highest standards. Tank access plates (inspection ports)are a useful addition to storage tanks (both diesel fuel or water) for the purpose of cleaning, inspection or the addition of tank accessories or upgrades (fuel senders, fuel pick-ups, water drains, fuel returns or DIY Clean Diesel fuel polishing fittings). The inspection ports come with all the gaskets, stainless fasteners and instructions for fitting. They do not require any welding and can be installed with diesel in the tank either on the top or on the side of the tank if there is no access/clearance at the top. Typical installation time varies with the tank material and wall thickness but usually is less than an hour. To get the best cleaning results one inspection port should be installed in the center of each baffled section in the tank. Larger or custom shape tank access plates (inspection ports) are available upon request.

Since 2012 the inspection ports are compulsory on diesel tanks according to same ISO Standard 21487

"4.3.10 Diesel tanks shall be equipped with inspection hatch(es) having a suitable diameter of at least 120 mm at suitable position(s) for cleaning and inspection of the lowest part(s) of the tank. The hatch must remain accessible when the tank has been installed in the craft. The hatch(es) may be located on the top or side of the tank."

 

 ROUND SHAPE VERSION

 

Tank access plate (inspection port) made of 316 stainless (can be used on water tanks as well) blank or with 1 accessory provision hole with fuel sender SAE pattern (for fuel sender, fuel pick-up, fuel return, water drain and DIY Clean Diesel fuel polishing fitting) The package includes gaskets, stainless fasteners and instructions for fitting. Installation cost varies please contact one of our AUTHORIZED AGENTS

OD190mm (150mm internal tank access)

Price - $260 + GST each - BUY NOW FROM OUR EBAY STORE

front and back s

 

STADIUM SHAPE VERSION

 

Tank access plate (inspection port) made of 316 stainless (can be used on water tanks as well) blank with 2 accessory provision holes with fuel sender SAE pattern (for fuel sender, fuel pick-up, fuel return, water drain and DIY Clean Diesel fuel polishing fitting) The package includes gaskets, stainless fasteners and instructions for fitting. Installation cost varies please contact one of our AUTHORIZED AGENTS.

220x150mm (170x100mm internal tank access)

With 2 provision holes Price - $320 + GST each - MADE TO ORDER CLICK HERE

220X150 DUAL

Blank  Price - $260 + GST each - BUY NOW FROM OUR EBAY STORE

Front small 2

 

IMPORTANT: We recommend that after every diesel tank cleaning/diesel fuel polishing procedure you replace primary and secondary filters on your boat to ensure a 100% clean fuel system.

For more information or a quote call us on 02 9972 9938 or fill in the CONTACT FORM.

DIESEL TANK ACCESORIES -DIESEL FUEL TESTING - DIESEL TANK CLEANING - DIESEL FUEL POLISHING - DIESEL FUEL TREATMENT